Boeing 737 MAX 10 Achieves FAA Certification
The FAA certified Boeing's 737 MAX 10 on October 20, 2026, clearing the final variant for delivery after years of delays and extensive testing.

Boeing's 737 MAX 10 received FAA certification on October 20, 2026. This concludes the regulatory approval process for all four main variants of the MAX family, following the certification of the MAX 7 in August 2026. The FAA has gradually eased restrictions on Boeing, increasing its production limit and allowing it to issue airworthiness certificates for finished aircraft. The first deliveries to customers are expected to begin in the coming months.
This certification was the first for a commercial aircraft under the full extent of the 2020 Aircraft Certification, Safety, and Accountability Act. The campaign involved nearly 1,000 flights, more than 2,000 flight-test hours, and 1,000 hours of ground testing. Bryan Bedford said: "The FAA’s decision follows a thorough review of the aircraft’s design and safety requirements."
Customer commitments and market impact
Major global carriers have placed substantial orders for the new variant. Key customers include United Airlines, Delta Air Lines, American Airlines, Ryanair, and Alaska Airlines. Alaska Airlines ordered 105 MAX 10s in January with options for 35 more.
More than 30 customers worldwide have placed firm orders for 1,555 MAX 10 aircraft. This figure represents over 30 percent of the entire open order book for the MAX family.
Operational specifications and advantages
The MAX 10 is designed to carry more passengers while burning less fuel than older aircraft. It offers a 20% reduction in fuel use and carbon dioxide emissions compared to previous generation jets. Boeing claims the MAX 10 offers the lowest per-seat operating costs of any single-aisle aircraft currently in service.
Its range extends up to 3,100 nautical miles. Passenger capacity varies significantly across the MAX family below.
| Model | Typical Two-Class Seating | Maximum Configuration |
|---|---|---|
| MAX 8 | 160-180 passengers | Not specified |
| MAX 9 | 175-195 passengers | Not specified |
| MAX 10 | 185-210 passengers | Up to 230 passengers |
Safety enhancements and program history
The MAX 10 program faced years of delays. These were caused by the 2018 and 2019 MAX 8 crashes that killed 346 people, tighter regulatory scrutiny, engine anti-ice system issues, and a navigation software problem identified in September 2026. A panel also flew off an Alaska Airlines MAX 9 in midair in 2024, renewing scrutiny of Boeing's manufacturing.
Certification incorporates a key safety upgrade. The aircraft introduces an advanced Angle-of-Attack system to manage sensor failures. This revised system continuously detects abnormal readings, blocks faulty data, and replaces it with standard values, while providing a cockpit warning. A switch allows pilots to silence a faulty stick shaker warning. This improved system will become standard on new MAX production and be available for retrofit on existing aircraft.
Stephanie Pope, president and CEO of Boeing Commercial Airplanes, stated: "Completing the certification program clears the path for us to deliver a Boeing airplane that will set a new standard in commercial aviation." Series production is now ramping up at Boeing's Renton facility as the company prepares for first deliveries.





